АвтоАвтоматизацияАрхитектураАстрономияАудитБиологияБухгалтерияВоенное делоГенетикаГеографияГеологияГосударствоДомДругоеЖурналистика и СМИИзобретательствоИностранные языкиИнформатикаИскусствоИсторияКомпьютерыКулинарияКультураЛексикологияЛитератураЛогикаМаркетингМатематикаМашиностроениеМедицинаМенеджментМеталлы и СваркаМеханикаМузыкаНаселениеОбразованиеОхрана безопасности жизниОхрана ТрудаПедагогикаПолитикаПравоПриборостроениеПрограммированиеПроизводствоПромышленностьПсихологияРадиоРегилияСвязьСоциологияСпортСтандартизацияСтроительствоТехнологииТорговляТуризмФизикаФизиологияФилософияФинансыХимияХозяйствоЦеннообразованиеЧерчениеЭкологияЭконометрикаЭкономикаЭлектроникаЮриспунденкция

Order of experiment’s performance

Читайте также:
  1. Definition of second order partial derivatives
  2. Differential equations of the first and second order. Homogeneous and non-homogeneous linear differential equations
  3. Ex. 5. Look at the following list of 'crimes'. Try to rate each crime on a scale from 1 to 10 (1 is a minor misdemeanour, 10 is a very serious crime). They are given in no order.
  4. Exercise 19 Here are some phrases from order letters. What kind of orders have these customers placed?
  5. Exists, performance, churches, restored, repertoire, ones, nationalities, orthodox, function, destroyed, shapes, in accordance with, competition
  6. II. Put the words in the correct order.
  7. Non-homogeneous second-order equations
  8. Order and degree of a differential equation
  9. Performance
  10. Put these words in order from (1) the least expensive to (5) the most expensive.
  11. The equations that allow lower-order

1. Install all devices on the optical bench, as shown in Figure 3.12.

2. Turn on the light source, adjust the height of all devices so that the light beam will pass through the all devices and will fall on the photocell.

3. Turn off the light source, connect the photocell circuit and record electrical current of photocell i0. Weak photocurrent i0 caused by exposure to a photocell extraneous light sources in the room.

4. Install the Limbo of analyzer to zero division. Turn on the light source S.

Smoothly rotate the polarizer to achieve the maximum deflection of the microammeter im. Here, obviously, the plane of polarization of the polarizer and analyzer are parallel to each other, i.e. the angle between them is zero.

5. No more changing the position of the polarizer, rotate the analyzer in the range of 0° to 360°, recording every 15° angle θ and a corresponding photocurrent i in column 2 of Table 3.1.

6. Repeat step 5 two times, write the value of the photocurrent i in columns 3 and 4 of Table 3.1.
Table 3.1 – Checking the law of Malus

θ град i 1 mA i 2 mA i 3 mA mA cosa cos2a
               
               
               
             
               

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |

Поиск по сайту:



Все материалы представленные на сайте исключительно с целью ознакомления читателями и не преследуют коммерческих целей или нарушение авторских прав. Студалл.Орг (0.002 сек.)